Subject	Fuel pump question
Posted by	timmaz on May 27, 2012 at 7:22 PM
	This message has been viewed 156 times.
Message	Im putting an LS1 in my 300zx. I have a Painless wiring harness for the LS1, its not specific to the 300zx. It has a fuel pump relay to kick on the pump when the key is turned. Im not sure how to wire it up since we have the 2 speed pump and controller. Any help would be appreciated.
Follow Ups	Fuel pump question - timmaz 19:22:00 05/27/12 The TT has a 3 speed pump/controller - WhiTTe Z 04:38:42 05/28/12 I have an Aeromotive FPR with a gauge that I can adjust. - timmaz 11:24:45 05/28/12 Yup should be two wires from the relay just - WhiTTe Z 23:21:33 05/28/12 I still have the stock TT pump should be fine for this setup (n/m) - timmaz 00:53:13 05/29/12 figure out which wire coming off the pump assembly - WhiTTe Z 02:01:29 05/29/12 I would just connect a wire from the relay - WhiTTe Z 17:33:10 05/29/12 I'm doing the swap because - timmaz 18:36:03 05/31/12
Post a Followup	You cannot reply to this message because you are not logged in.