TwinTurbo.NET: Nissan 300ZX forum - You'll just have to get it aligned.
People Seeking Info
 
   


     
Subject You'll just have to get it aligned.
     
Posted by AsaHerring on May 17, 2012 at 1:42 PM
  This message has been viewed 132 times.
     
In Reply To lowering eibach 1 inch drop posted by hellraz0r1337 on May 17, 2012 at 12:03 PM
     
Message The rear upper control arms have a certain amount of adjustment, but it's nearly impossible to get it good by eye. With a 1" drop you should not have a problem getting it aligned in the rear. The 300 degree kit would surely fix the front without a problem. If you go to get an alignment and they tell you they can't fix, I've had this happen before, because you've lowered it, then try another place. I think it can be done with stock suspension. I lowered mine 1.75" front and 2.2" rear, and I just bought adjustable upper control arms and used multiple 1/4" washers in the front to fix the camber.

     
Follow Ups  
     
Post a
Followup

You cannot reply to this message because you are not logged in.