| Message |
ok,...I am beginning to place it all back together...I have read posts about deleting the air regulator and capping, and just the PCV hose from valve cover to small air filter.... I just did a plenum over (alot of grinding after welds, etc) removing as much as possible, but kept the pcv housings but smaller... question is...are these two removals hold any problems..??? removing air regulator.....capping the pcv in the plenum and just connect small filter to intake valve cover tube...? I have read the normal pcv re-route, not for me....curious about these two options....like opinions.....thanks
 |
 |
