Subject	There is a small lower portion of the shroud that comes off
Posted by	my91z on May 05, 2012 at 5:59 PM
	This message has been viewed 161 times.
In Reply To	Re: Put a socket on the crankshaft and turn it with a wrench. posted by Dawei on May 05, 2012 at 04:22 PM
Message	and you can access the pulley/crank bolt no problem. I think you need a 27mm socket if I remember correctly. Also, I found the HF leak down tester has incorrect instructions included with it. Search online for instructions from other vendors/sites. I also replaced the gauge with colored bands with a regular pressure gauge. Mike --------------------------------------------------------
Follow Ups	Is this possible: - Dawei 14:39:44 05/04/12 Re: Is this possible: - Dawei 14:42:12 05/04/12 Here's an idea. - Draker (Eugene, OR) 15:44:22 05/04/12 Re: Here's an idea. - Dawei 18:52:13 05/04/12 What I like to do is use a wooden dowel - Draker (Eugene, OR) 19:03:39 05/04/12 Re: What I like to do is use a wooden dowel - Dawei 04:12:40 05/05/12 Put a socket on the crankshaft and turn it with a wrench. (n/m) - Draker (Eugene, OR) 12:09:08 05/05/12 Re: Put a socket on the crankshaft and turn it with a wrench. - Dawei 16:22:43 05/05/12 There is a small lower portion of the shroud that comes off - my91z 17:59:41 05/05/12 Re: There is a small lower portion of the shroud that comes off - Dawei 19:41:16 05/05/12 Re: There is a small lower portion of the shroud that comes off - Dawei 19:41:34 05/05/12
Post a Followup	You cannot reply to this message because you are not logged in.