Subject	Ohm them out and see if it's the injectors or the harness.
Posted by	Draker (Eugene, OR) on May 04, 2012 at 11:29 AM
	This message has been viewed 118 times.
In Reply To	Injector Question posted by f1ym4n on May 04, 2012 at 07:27 AM
Message	If you changed the harness it's more than likely the injectors. I would go with Bernie's kit as well. You can never go wrong with the TB coolant line delete. Even more so if you still have your EGR because that makes the job much worse.
Follow Ups	Injector Question - f1ym4n 07:27:40 05/04/12 Ohm them out and see if it's the injectors or the harness. - Draker (Eugene, OR) 11:29:42 05/04/12 EGR is removed - f1ym4n 11:57:03 05/04/12 Yes the coolant temp sensor needs to be in place and - 300ZMang 12:24:50 05/04/12 And the good news is it's right in front and easy to change. (n/m) - Draker (Eugene, OR) 12:28:23 05/04/12 Best Part is... - f1ym4n 14:25:43 05/04/12
Post a Followup	You cannot reply to this message because you are not logged in.