Subject	now its the TB
Posted by	gbeto on April 30, 2012 at 12:21 PM
	This message has been viewed 144 times.
Message	fixed my alternator issue, and now this. my timing belt keeps on pusshing itself to the back of the gears, towards the backing plates, I tried pushing it back by hand while cranking it by hand as well but didn't work so I took everything off and set it right, at first start it went back, I can hear it rubbing against the plate and I can tell TB dust all around and that's just a few.min going, what gives?
Follow Ups	now its the TB - gbeto 12:21:24 04/30/12 Make sure your idler pulleys are torqued down properly (n/m) - AHos(Chicago) 13:13:38 04/30/12 Re: Make sure your idler pulleys are torqued down properly - mkhoid 06:59:03 05/01/12 Do you have the large washers on both sides of the crank - Evan_Wright (Ca) 14:15:27 04/30/12 holly.... - gbeto 15:47:10 04/30/12
Post a Followup	You cannot reply to this message because you are not logged in.