| Message |
I'm a noob when it comes to rims, but I have done some research and I want you guy's opinions. So the rims I'm looking into buying have a center bore of 73.1. The stock center bore is 66.1. Not familiar with rims and I'm just wanting to know if the CB will work? Also I have been looking into different fitment combos and the set up I have chosen, not yet bought, are as the following.
Front: 18x8, Offset 40mm, CB 73.1, with 235s
Rear: 18x9, Offset 35mm, CB 73.1, with 255 or 265s. To me, it looks like on the front I will need some wheel spacers because on the stock suspension and rims there is an inch, plus or minus a mm or two, between the 225s and the upper link. And on the way to my house are some powertrix coilovers. If I have my way it's going low. I'm not against buying wheel spacers I just don't want to waste my money if I don't need them.
|
 |
