Subject	Appears to be the wrong spark plugs.
Posted by	Woody75 (Denver) on November 07, 2011 at 3:58 PM
	This message has been viewed 138 times.
In Reply To	Video and picture. Plug was brand new, never used. posted by akdawgg99 on November 05, 2011 at 09:04 PM
Message	Looks like a short NA sized plug and its a copper plug not plat. Ohm the injectors to make sure they are good. Listening doesnt always work. And have you checked the timing to make sure its right? wont keep the cylinder from firing but still needs to be correct if its wrong. JackB nimble JackB quick JackB can suck my dick =P - james-lee 11/02/01 Arrogance is the #1 weapon against Supra Owners - MikeH 08/06/02 Dallas with a Z: I like the bulge dude 05/02/03 Bezbefootball: Does dick have anything for me? 10/21/03
Follow Ups	No spark issues. firing on 3 cylinders - akdawgg99 11:49:06 11/05/11 How about the PTU sub-harness? (n/m) - Draker (Eugene, OR) 12:05:52 11/05/11 got the PTU and sub-harness from Bernie - akdawgg99 12:14:59 11/05/11 Then it's probably good. - Draker (Eugene, OR) 15:52:46 11/05/11 No, nothing changes. (n/m) - akdawgg99 19:33:09 11/05/11 Sorry buddy I'm at a loss (n/m) - craigz96tt 19:36:41 11/05/11 Check ground pack on rear of pass side plenum (n/m) - craigz96tt 18:18:26 11/05/11 Ground is good. I have an extra ground to the neg terminal (n/m) - akdawgg99 19:32:17 11/05/11 Sorry it's cyl 2, 3 and 5. Cyl 3 is getting fuel and spark - akdawgg99 19:37:00 11/05/11 Video and picture. Plug was brand new, never used. - akdawgg99 21:04:55 11/05/11 Appears to be the wrong spark plugs. - Woody75 (Denver) 15:58:49 11/07/11 I will be OHM testing injectors and changing plugs this week - akdawgg99 12:13:02 11/08/11 I meant engine/CAS timing. (n/m) - Woody75 (Denver) 13:26:52 11/08/11 Sorry.. Yeah I have set the timing also. 15* BTDC (n/m) - akdawgg99 14:29:15 11/08/11 Move the EFI harness ground from the balance tube back - Samuel (Dallas) 11:54:12 11/09/11 That would be amazing if that does it - akdawgg99 16:31:18 11/09/11
Post a Followup	You cannot reply to this message because you are not logged in.