Subject	PTU
Posted by	Samz91tt on November 02, 2011 at 7:21 PM
	This message has been viewed 195 times.
Message	Okay so the car was at the body shop for 2 days and just as i was about the go home Z wouldn't want to start.. I tried depressing the gas pedal several times while starting, car still didn't start.. so i ran the ecu codes and ecu threw code 21.. I had an S2 PTU home so i went back home with a friend and got that PTU to replace my S1 PTU.. After i installed the S2 PTU, ECU gave code 55 however car didnt want to start just as before.. it took around 10 min to start the car and the moment it did, it started backfiring alot and i mean ALOT.. after around 5min of rough idling the Z got normal and i took a spirited drive back home with the car acting perfect.. The question here is all this trouble starting after i installed the S2 PTU and the backfires and rough idling for 5 min were due to excess fuel?
Follow Ups	PTU - Samz91tt 19:21:03 11/02/11 Seems strange but could be? With the engine idling - jzack 20:40:19 11/02/11 yes when i jiggle the ptu subharness cylinders stop - Samz91tt 04:53:42 11/03/11 Good! - pretty easy to bypass, just basic electrical - jzack 18:09:14 11/03/11 Yea but i cant seem to figure a tidy way to reroute the - Samz91tt 18:46:04 11/03/11 Found the write up on how to eliminate the PTU subharness (n/m) - Samz91tt 06:50:45 11/03/11
Post a Followup	You cannot reply to this message because you are not logged in.