Subject	It's a good guess..
Posted by	Draker (Eugene, OR) on October 04, 2011 at 4:06 PM
	This message has been viewed 98 times.
In Reply To	Re: Check the timing posted by E-Z on October 04, 2011 at 02:27 PM
Message	Put a stethoscope on the injectors of 2 and 4. If they click then you know they are at least being triggered. If not, then you should start looking at the ECU if you confirmed the harness is good to the ECU connector. Next you could get a spark tester and put that inline and visually inspect the plugs sparking. You already said you had compression. If your numbers are in spec and have good uniformity within 14psi of eachother then it's not likely that your valves are stuck. If in doubt still, do a leak down test on all cylinders.
Follow Ups	Two Cylinders not firing - E-Z 10:55:13 10/04/11 Check the timing - Draker (Eugene, OR) 11:55:16 10/04/11 Re: Check the timing - E-Z 14:27:42 10/04/11 It's a good guess.. - Draker (Eugene, OR) 16:06:09 10/04/11 Re: It's a good guess.. - E-Z 17:00:52 10/04/11
Post a Followup	You cannot reply to this message because you are not logged in.