Subject	Replace the belt with WD40 on it? You didn't have the belt
Posted by	zellamay on September 25, 2011 at 4:22 PM
	This message has been viewed 114 times.
In Reply To	Alternator belt squeaks continuously after new belts install posted by Havoc300 (Chicago) on September 25, 2011 at 02:01 PM
Message	tight enough. I would guess that the WD40 didn't stop the slipping, but just stopped the noise by lubricating it, which is counter-productive. Not sure how you're determining that the crank is working harder, but the belt needs to be very tight. This is a common problem on these cars. Also, if the belt is squeeking, then stops when it warms up, that tells you the belt is almost tight enough.
Follow Ups	Alternator belt squeaks continuously after new belts install - Havoc300 (Chicago) 14:01:26 09/25/11 Replace the belt with WD40 on it? You didn't have the belt - zellamay 16:22:29 09/25/11 When the belt is tightend more, there is a low tone - Havoc300 (Chicago) 10:33:20 09/26/11 Replace belt with WD40 on it. The tension specs for - Gordo 93TT Daytona 08:24:59 09/27/11
Post a Followup	You cannot reply to this message because you are not logged in.