Subject	Pulling crank dampener pulley
Posted by	JMartz on September 17, 2011 at 7:29 AM
	This message has been viewed 97 times.
In Reply To	Timing Belt Update posted by msb1987 on September 17, 2011 at 12:55 AM
Message	Although it might work you don't need a jaw type puller for this job. Clean the threads on the 2 holes in the dampener with a tap and use 2 of the long bolts holding the front cover (remove the ruber wahsers and add some larger washers). Using a standard dampener pulley it comes out easy. The evaporatior is close so protect it.
Follow Ups	Timing Belt Update - msb1987 00:55:09 09/17/11 Is the car a 5speed or automatic? - Stadsport (PHX) 04:36:10 09/17/11 Pulling crank dampener pulley - JMartz 07:29:24 09/17/11 You can use the starter method to break the bolt loose: - zellamay 09:20:52 09/17/11 ^^ Good info. (n/m) - Draker (Eugene, OR) 11:25:43 09/17/11 Re: You can use the starter method to break the bolt loose: - msb1987 13:58:02 09/17/11
Post a Followup	You cannot reply to this message because you are not logged in.