Subject	stock boost jet question
Posted by	akdawgg99 on September 04, 2011 at 6:48 PM
	This message has been viewed 117 times.
Message	If I'm running stock boost solenoids on stock boost levels, what size welding tips do I need, .035? And do I install them in the stock location or can I run it from the vacuum line from the throttle body nipple? My understanding is I cannot run stock boost pressure without them?
Follow Ups	stock boost jet question - akdawgg99 18:48:59 09/04/11 Boost jets are for raising the boost above stock. - zellamay 22:11:50 09/04/11 My understanding was that there were stock boost jets - akdawgg99 08:18:09 09/05/11 No boost jets on a stock setup. If you get the ecu - zellamay 08:30:47 09/05/11 There are stock boost jets - Stadsport (PHX) 16:41:24 09/05/11 Right, some people call those "boost jets". - zellamay 17:17:23 09/05/11 This is what I'm talking about. - akdawgg99 20:19:18 09/05/11 Sorry, HERE is a good explanation of "boost jets" and - zellamay 20:45:31 09/05/11 Re: Sorry, HERE is a good explanation of "boost jets" and - akdawgg99 18:20:15 09/07/11 I'd find a stock one somewhere. Hard to beleive ther - zellamay 19:25:51 09/07/11
Post a Followup	You cannot reply to this message because you are not logged in.