Subject	Tested the Aux Fan and it's working fine.
Posted by	Draker (Eugene, OR) on August 07, 2011 at 1:58 PM
	This message has been viewed 181 times.
In Reply To	High A/C Pressures on high side? posted by Draker (Eugene, OR) on August 06, 2011 at 07:57 PM
Message	Came on with the AC with engine temps around 212 per the Aux fan diagnostic in the FAQ. Also found high pressure line to be hot, and low pressure to be cold. If I didn't have gauges on the system I'd say it was working fine. But the compressor keeps running and the pressures go sky high.
Follow Ups	High A/C Pressures on high side? - Draker (Eugene, OR) 19:57:28 08/06/11 Is the condensor fan working? What are the line temps? (n/m) - sandmanz32 11:31:33 08/07/11 The actual temps of the AC lines? - Draker (Eugene, OR) 12:21:19 08/07/11 R12 systems have both an expansion valve and - JMartz 07:48:25 08/08/11 Re: The actual temps of the AC lines? - sandmanz32 18:56:32 08/08/11 Fan works, high line is hot, low is cold. - Draker (Eugene, OR) 14:00:06 08/07/11 Z's that were originally equipped with R12 only had - aliaZ 11:34:04 08/07/11 The Aux fan works when I trigger it with Conzult. - Draker (Eugene, OR) 12:19:24 08/07/11 Tested the Aux Fan and it's working fine. - Draker (Eugene, OR) 13:58:39 08/07/11 Mine had a similar issue - DE944 22:07:56 08/07/11 Interesting, I'm going to recover the system tomorrow. - Draker (Eugene, OR) 23:35:57 08/07/11 i cleaned the outside not the inside. - DE944 10:02:50 08/08/11 Three things that come to mind to me... - Stadsport (PHX) 18:33:06 08/08/11 I didn't install the drier. - Draker (Eugene, OR) 10:40:47 08/09/11 I told you on 300ZX.com - aztecz34 20:50:33 08/08/11 I am well aware of the valve. - Draker (Eugene, OR) 10:31:33 08/09/11 I think I got it fixed. - Draker (Eugene, OR) 10:56:34 08/09/11 Re: I think I got it fixed. - aztecz34 23:06:22 08/09/11
Post a Followup	You cannot reply to this message because you are not logged in.