Subject	Starting Issues
Posted by	f1ym4n on July 15, 2011 at 9:27 PM
	This message has been viewed 103 times.
Message	Since my swap, my car has been changing its mind about starting. sometimes it does, most times it doesnt. It cranks like no other so i know the battery is charged, starter and alternator all work, and push starts dont work. I smell gas so fuel is coming in, but i get no spark. Using diagnostics, i get the codes for the "CAS" and "Power to CAS". CAS being cam angle sensor.Thinking the sensor went bad, i bought a new one and replaced it. This did nothing. The only other thing i can think of is that the connections in the ECU connecting to the harness are bad. Either erosion over time or just bad connections. I feel it has to be something stupid like a bad connection or relay (yes the CAS is plugged in). Any suggestions before i buy a new harness?
Follow Ups	Starting Issues - f1ym4n 21:27:13 07/15/11 PTU is another place to check - that controls the - jzack 04:38:06 07/16/11 I've done that, it has spark (n/m) - f1ym4n 17:12:07 07/16/11 Re: I've done that, it has spark - undert9281 19:10:28 07/16/11 Re: Re: I've done that, it has spark (n/m) - undert9281 19:48:13 07/16/11 CAS - f1ym4n 22:33:28 07/16/11 Re: CAS - undert9281 07:39:04 07/17/11 Crank.. - f1ym4n 10:51:38 07/17/11 Re: Crank.. - f1ym4n 22:27:51 07/17/11 FYI: Only thing our engines have is a CAS.... (n/m) - jzack 16:19:17 07/17/11 Re: FYI: Only thing our engines have is a CAS.... - supermario680 08:31:32 07/18/11
Post a Followup	You cannot reply to this message because you are not logged in.