Subject	Plenum Re-install Question
Posted by	Joeman on June 21, 2011 at 5:25 PM
	This message has been viewed 173 times.
Message	I’m taking the long way to get there, but after 2.5 years (the arrival of my daughter took priority), I am putting my plenum back into the car. I have a question about the coolant hose by-pass. I am referencing two great documents in the process (NytWolf’s write-up and the Plenum pull TECH page). I re-routed the water hoses, by-passing the plenum as shown in those documents. However, I am not sure which hose goes to the carbon canister. As shown in the TECH write-up, is it the green dot shown in Step 12, Picture 19? Thanks for any help or photos to clarify. To err is human, to air guitar is devine! \m/
Follow Ups	Plenum Re-install Question - Joeman 17:25:02 06/21/11 This might help. - Draker (Eugene, OR) 17:56:22 06/21/11 Under the drivers's side of the plenum there is - JMartz 18:07:44 06/21/11 Re: Under the drivers's side of the plenum there is - Joeman 19:08:41 06/21/11
Post a Followup	You cannot reply to this message because you are not logged in.