Subject	Re: Plenum pull question - turbo outlet pipes
Posted by	johnbsz on June 08, 2011 at 5:44 AM
	This message has been viewed 133 times.
In Reply To	Plenum pull question - turbo outlet pipes posted by RedKev on June 07, 2011 at 09:07 PM
Message	I just did mine also. It is a bear. I had a Skill 1/4 drive with a long extension and 10mm socket. The Skill is just a battery powered ratchet drive that turns with the push of a button, something like an air driven ratchet. Anyway, I used the extension under the master brake cylinder so I had access for the drive.
Follow Ups	Plenum pull question - turbo outlet pipes - RedKev 21:07:39 06/07/11 The boost leak write up has good info on tightening those up (n/m) - BoneZ 21:14:57 06/07/11 Have you ever heared of turbo clocking? I had the same probl - Bo (houston) 00:48:25 06/08/11 Re: Plenum pull question - turbo outlet pipes - johnbsz 05:44:10 06/08/11 1/4" sockets are highly under-rated, and your friend. - CoHPhasor 12:25:30 06/08/11 2nd. That's what I've used to get to those clamps. - doug8867 20:10:05 06/08/11 I was able to pull the plenum for a injector - JMartz 11:48:54 06/09/11
Post a Followup	You cannot reply to this message because you are not logged in.