Subject	OK thanks for the reply.
Posted by	pa300 on May 30, 2011 at 5:17 PM
	This message has been viewed 130 times.
In Reply To	You have to back probe it. posted by Draker (Eugene, OR) on May 30, 2011 at 01:06 PM
Message	So I leave both plugs connected and try to get a signal of volts from between the two wires shown in the FSM? The white center wire and the black wire on the grey connector, not the square one on the front of the unit? I'm so confused, the FAQ writeup has no pictures so its no help. I'm not so good at this so I need as detailed a description as possible so I can test it and adjust it. Thanks again for the help. -Eric
Follow Ups	Please help!! I'm having trouble with the TPS. - pa300 07:08:34 05/30/11 I also have the same problem, mine also bogs out every now.. - 300zx_2+2 10:05:23 05/30/11 You have to back probe it. - Draker (Eugene, OR) 13:06:13 05/30/11 OK thanks for the reply. - pa300 17:17:32 05/30/11 Sounds right to me. - -Grimm- 19:38:37 05/30/11 Could you tell me little more about your stumble? - pa300 03:08:08 05/31/11 Mine was as you describe - -Grimm- 14:19:04 05/31/11 Yes, you can back probe the grey connector - CGDriven 19:43:26 05/30/11 Great guys, thanks alot. I'm going to try these things. - pa300 03:04:06 05/31/11 be sure to track down any and all vacuum leaks - CGDriven 06:16:07 05/31/11
Post a Followup	You cannot reply to this message because you are not logged in.