Subject	Please help!! I'm having trouble with the TPS.
Posted by	pa300 on May 30, 2011 at 7:08 AM
	This message has been viewed 149 times.
Message	Please help me! I 'm having trouble with my tps, I moved it to try to adjust it to help cure a stumble that I had. When I went to test it based on the FSM description I got no volts. Also I tried to understand the FAQ on adjusting it from this site, but there's no pictures so it's useless. Could someone please help me adjust and check my TPS? How it stands now. It idles around 1300 RPM's and acts like the Idle air control valve is acting up but it's not. It's definitely the TPS. If I remove the plug on the tps that faces the front of the car, there is no change. It doesn't skip a beat. So I'm thinking that it's in hard idle mode, but how do I reset it and get it back to reading the TPS signal? And which of the two plugs is is the actual signal? Thanks for any input you can provide -Eric 267-261-5328
Follow Ups	Please help!! I'm having trouble with the TPS. - pa300 07:08:34 05/30/11 I also have the same problem, mine also bogs out every now.. - 300zx_2+2 10:05:23 05/30/11 You have to back probe it. - Draker (Eugene, OR) 13:06:13 05/30/11 OK thanks for the reply. - pa300 17:17:32 05/30/11 Sounds right to me. - -Grimm- 19:38:37 05/30/11 Could you tell me little more about your stumble? - pa300 03:08:08 05/31/11 Mine was as you describe - -Grimm- 14:19:04 05/31/11 Yes, you can back probe the grey connector - CGDriven 19:43:26 05/30/11 Great guys, thanks alot. I'm going to try these things. - pa300 03:04:06 05/31/11 be sure to track down any and all vacuum leaks - CGDriven 06:16:07 05/31/11
Post a Followup	You cannot reply to this message because you are not logged in.