Subject	CAS Sensor, Crank Angle Sensor trouble!
Posted by	NismoFun on May 27, 2011 at 12:38 PM
	This message has been viewed 330 times.
Message	Hi all! My first post.. =) I replaced my timing belt on my 300ZX 90 NA, and stupid as i was, i took of the CAS sensor 3x12mm bolts and unplugged the contact. When new gates belt was on, and the cas mounted in place, the car starts very easy like it used to, but sounds like it doesnt get any fuel at all. The sound of engine is like what it used to be the first 2 seconds, but then rpm falls to 500-600 and the engine is dying. Im sure the belt is 100% correctly on aligned with white marks. All contacts has been cleaned, and wires are in great condition. The car was working perfect until this sensor came off. Probably a stupid thing to do, but i tried to start the engine with the new belt in place, without the CAS sensor. Have i ruined everything? What should i do? No Nissan dealers here in Norway dont even want to look at my car... All help will be greatfull. Got videos and pics if some kind person will help me out.. Emailadress: kontakt@streetdecals.net
Follow Ups	CAS Sensor, Crank Angle Sensor trouble! - NismoFun 12:38:02 05/27/11 have u tried resetting the timing with a timing light? (n/m) - CGDriven 13:41:00 05/27/11 ^^^ Yes, you need to buy or borrow a timing light ^^^ - OverZealous (CT) 09:48:39 05/29/11
Post a Followup	You cannot reply to this message because you are not logged in.