Subject	Idle with these cars is very picky. I would start with items
Posted by	robzone0911 on May 22, 2011 at 6:32 PM
	This message has been viewed 103 times.
In Reply To	NA Idle problem posted by stiz32 on May 22, 2011 at 03:45 PM
Message	you removed during the injector swap process. Then look for any (and I mean ANY) vacuum leaks. With the Z even the slightest amount of un-metered air will cause idle problems. It is tedious, but you can use a piece of hose and a slow flow of propane through the hose. Wave the hose near parts of the vacuum lines and if the RPM's rise, you have a leak there. Good luck. Before Swap After Swap
Follow Ups	NA Idle problem - stiz32 15:45:04 05/22/11 Idle with these cars is very picky. I would start with items - robzone0911 18:32:13 05/22/11 vacuum leak - CGDriven 18:32:41 05/22/11 Re: vacuum leak - stiz32 19:20:45 05/22/11 Did you replace the lower injector insulators? (n/m) - Draker (Eugene, OR) 20:49:53 05/22/11 Re: Did you replace the lower injector insulators? - stiz32 09:46:09 05/23/11 Normally I would point to the IACV/AAC - Draker (Eugene, OR) 12:02:37 05/23/11 Re: Normally I would point to the IACV/AAC - stiz32 12:49:24 05/23/11 I have an NA and can tell you that - Trailboss 09:39:37 05/24/11 Re: I have an NA and can tell you that - stiz32 10:09:55 05/24/11
Post a Followup	You cannot reply to this message because you are not logged in.