Subject	rough idle and stumble at 65-80mph holding speed
Posted by	bizaws on May 04, 2011 at 11:19 PM
	This message has been viewed 232 times.
Message	I have a tt that is fully built everything is new, the enigne itself has 1100 miles on it. It has a really rough idle, kinda sounds like a miss but when it revs no prob. When I try to maintain a constant speed between 65-80 it stumbles bad, when it does this i just accelerate or puch in the clutch and its fine for about 15 sec and it will do it again. I have a dual intake, with the dual maf translator and 850cc injectors by jecs, and yes the ecu is programmed for these. If I could get any advise please help thanks.
Follow Ups	rough idle and stumble at 65-80mph holding speed - bizaws 23:19:00 05/04/11 Does air hit your filter while cruising? (n/m) - craigz96tt 08:41:32 05/05/11 Re: Does air hit your filter while cruising? - bizaws 13:38:07 05/05/11 do you have a facia with a large front opening? - ForceFedTT (SoCal) 11:19:10 05/06/11 It's your injectors, Venom. There history on the Z32 are - Spongerider :) 11:45:29 05/05/11 Re: It's your injectors, Venom. There history on the Z32 are - bizaws 12:58:19 05/05/11 ok, What do you mean 'new shiny manifolds'? - Spongerider :) 13:15:54 05/05/11 Re: rough idle and stumble at 65-80mph holding speed - bizaws 13:45:22 05/05/11 Well from what you are stating I would start looking for - Spongerider :) 14:04:12 05/05/11 Re: rough idle and stumble at 65-80mph holding speed - bizaws 16:47:04 05/05/11 hmm... you have the Selin translator and your experiencing - ForceFedTT (SoCal) 11:15:32 05/06/11 Re: hmm... you have the Selin translator and your experiencing - bizaws 13:35:11 05/06/11 well..if you know the mafs are good... - ForceFedTT (SoCal) 16:47:16 05/07/11 Dead spot in the TPS?? Never mind if it is brand new - Noncon (STL) 17:58:30 05/07/11 im not sure about the tps - bizaws 21:56:22 05/10/11
Post a Followup	You cannot reply to this message because you are not logged in.