Subject	Measure from both suspension and body point >>
Posted by	Gordo 93TT Daytona on May 01, 2011 at 9:41 AM
	This message has been viewed 104 times.
In Reply To	KYB AGX and Eibach Pro Kit Springs posted by SomZ on April 28, 2011 at 06:14 PM
Message	First make certain your floor is level... use a level to insure. Then measure from a bottom suspension point, like the bottom of the shock mounts. Next measure from upper lip of the fenders on a line plumb with wheel centers. The object is to determine the source of the lean. Could be rubber suspension mounts, could be springs themselves, could be the rubber subframe to body mounts. Will not be the shocks. _________________________________________________
Follow Ups	KYB AGX and Eibach Pro Kit Springs - SomZ 18:14:21 04/28/11 You measured from ground to fender, yes? In my - jzack 20:57:44 04/28/11 Re: You measured from ground to fender, yes? In my - SomZ 03:51:43 04/29/11 Please help! - SomZ 23:29:58 04/29/11 Make sure your sway bars don't have any load in them. (n/m) - not4resaleZ 11:11:53 04/30/11 Re: Make sure your sway bars don't have any load in them. - SomZ 11:54:09 04/30/11 some venders sell adjustable end links for the sway bars. - not4resaleZ 08:45:08 05/01/11 Measure from both suspension and body point >> - Gordo 93TT Daytona 09:41:38 05/01/11
Post a Followup	You cannot reply to this message because you are not logged in.