Subject	KYB AGX and Eibach Pro Kit Springs
Posted by	SomZ on April 28, 2011 at 6:14 PM
	This message has been viewed 249 times.
Message	Just finished installing KYB AGX, Eibach Pro Kit Springs, and the 300 Degree camber kit on my N/A Z32. My question is...when looking at the car from the rear the passenger side is lower than the driver side? Have the 001 springs up front and the same number of threads on all four struts. What could be causing this?
Follow Ups	KYB AGX and Eibach Pro Kit Springs - SomZ 18:14:21 04/28/11 You measured from ground to fender, yes? In my - jzack 20:57:44 04/28/11 Re: You measured from ground to fender, yes? In my - SomZ 03:51:43 04/29/11 Please help! - SomZ 23:29:58 04/29/11 Make sure your sway bars don't have any load in them. (n/m) - not4resaleZ 11:11:53 04/30/11 Re: Make sure your sway bars don't have any load in them. - SomZ 11:54:09 04/30/11 some venders sell adjustable end links for the sway bars. - not4resaleZ 08:45:08 05/01/11 Measure from both suspension and body point >> - Gordo 93TT Daytona 09:41:38 05/01/11
Post a Followup	You cannot reply to this message because you are not logged in.