Subject	Average is meant for a chip programed for dual intake, add
Posted by	Wright (Ca) on April 17, 2011 at 11:15 PM
	This message has been viewed 259 times.
In Reply To	She is set to AVERAGE right now if memory serves me right. posted by samsungz on April 17, 2011 at 04:34 PM
Message	for a chip programmed for single intake. Just a thought but if your chip was actually for single intake and you had your chip set to average it would run lean. Also there are dual intake(w/dummy maf) and dual intake(dual maf) programs out there. SpecialtyZ has a lot of tuning experience with dual maf Z's and may be able to get you a better tune. Formerly: ZEVAN (Ca), Evan3zx(ca)
Follow Ups	>Engine Knocking while running VERY LEAN at IDLE - HELP :( - samsungz 15:39:26 04/17/11 Is the sellin translator set to add or average? (n/m) - Wright (Ca) 16:04:21 04/17/11 She is set to AVERAGE right now if memory serves me right. - samsungz 16:34:51 04/17/11 Average is meant for a chip programed for dual intake, add - Wright (Ca) 23:15:51 04/17/11 Thanks for the easy explaination, his Z has the Selin intake, - samsungz 08:18:36 04/18/11 Any codes? Btw, ever get your white '95 z running? - Wright (Ca) 13:49:08 04/18/11 When we 1st started his Z up for 7-10 seconds at a time .... - samsungz 18:27:50 04/18/11 Check your fuel Pressure with a gauge. - Drk93TT 20:39:13 04/17/11 Fuel pressure was around 38PSI i think.... .. - samsungz 21:01:03 04/17/11
Post a Followup	You cannot reply to this message because you are not logged in.