Subject	Injector connectors code 51
Posted by	boostlv on March 28, 2011 at 7:45 PM
	This message has been viewed 208 times.
Message	Ok so my car gave me code 51 so I disconnected the injectors and rubber boots were all cracked. I tried cleaning them they had some green stuff on them. I thought it worked, but after 3 days my car again gave me code 51 again. I'm gonna order some new connectors, how hard is it to solder them on? Where would I cut the old connector from? Any tips I would greatly appreciate
Follow Ups	Injector connectors code 51 - boostlv 19:45:40 03/28/11 Re: Injector connectors code 51 - Synd (NoVA) 20:04:07 03/28/11 Pretty simple if you have any experience with a soldering - ForceFedTT (SoCal) 20:17:33 03/28/11 The injectors from Nissan come 3 in a set with just 2 wires. - boostlv 20:30:43 03/28/11 Yes, you should replace each one since you're - ForceFedTT (SoCal) 02:04:51 03/29/11 Don't get Nissan. Bernie and others sell some, or the GM - CoHPhasor 20:07:59 03/31/11
Post a Followup	You cannot reply to this message because you are not logged in.