Subject	Re: bad cas & left cylinder head.
Posted by	MaxxAction on March 10, 2011 at 6:28 PM
	This message has been viewed 209 times.
In Reply To	bad cas & left cylinder head. posted by albert i on March 10, 2011 at 05:26 PM
Message	Hey Albert... There is a write up on the JWT website about this very thing. Basically you drill the dowel holes on the bracket out slightly, fill the holes about half way with JB weld or some similar product, and align it using a run-out gauge on the cam to center it. It doesn't look to be that difficult, and it also shows you how to replace the dowel in the cam if the teeth are eaten off of it.
Follow Ups	bad cas & left cylinder head. - albert i 17:26:32 03/10/11 Re: bad cas & left cylinder head. - MaxxAction 18:28:49 03/10/11 Re: Re: bad cas & left cylinder head. (n/m) - 300zxBoulderCO 18:40:48 03/10/11 Re: Re: bad cas & left cylinder head. - 300zxBoulderCO 18:41:48 03/10/11 Here - Fast300 22:19:11 03/10/11 Re: Here (n/m) - albert i 12:40:19 03/11/11 Re: Here - albert i 12:41:11 03/11/11 Are you sure this is your problem? $$ + time! - Zarcasm(Hfd, CT) 21:39:37 03/11/11 Are you sure this is your problem? $$ + time! - Zarcasm(Hfd, CT) 22:48:06 03/11/11
Post a Followup	You cannot reply to this message because you are not logged in.