Subject	You've done everyone a big favor....
Posted by	TTkeeper on February 20, 2011 at 12:02 AM
	This message has been viewed 221 times.
In Reply To	No! Do not dremel the plenum while it's off the engine. posted by Zarcasm(Hfd, CT) on February 19, 2011 at 11:57 AM
Message	Could you take closeup pics of each dremeled section ( but with enough background for reference and depth measurement) , number the photos by injector #, and put the pics on a cd ? You could sell the pics for a reasonable price and people could imitate the patterns on their own plenums when they have their's off so future plenum pulls wouldn't be necessary for injector problems.....I'd buy one. Does the pic show the final cuts ? Have you tested the plenum on the engine and verified that all injectors can be removed without interference ? thanks.
Follow Ups	possible to take #5inj out without remove the intake? - lackodeniro 15:36:25 02/18/11 dremel method works fine on #5 - aliaZ 15:49:08 02/18/11 Re: possible to take #5inj out without remove the intake? - txq45 17:34:23 02/18/11 Yes, but I suggest pulling the plenum one more time... - Ted (92TT) 22:51:04 02/18/11 No! Do not dremel the plenum while it's off the engine. - Zarcasm(Hfd, CT) 11:57:35 02/19/11 That's why I said mark with a Sharpie before removing :) (n/m) - Ted (92TT) 12:32:18 02/19/11 You've done everyone a big favor.... - TTkeeper 00:02:54 02/20/11 Thanks, here are the pics - Zarcasm(Hfd, CT) 15:31:00 02/20/11 You'll need to bite the bullet soon and replace em all - CoHPhasor 17:51:29 02/19/11 Don't do dremel. - njz 19:29:58 02/19/11
Post a Followup	You cannot reply to this message because you are not logged in.