Subject	I wouldn't worry about recirculated fuel cooling issues.
Posted by	ZiNnYc on January 25, 2011 at 5:37 PM
	This message has been viewed 94 times.
In Reply To	Re: It will hold ~ 35 psi at idle, and it is boost referenced posted by -Grimm- on January 25, 2011 at 04:05 PM
Message	Newer cars have switched to dead head systems. As long as there is as little conduction of heat through the surrounding metal as possible, you should be fine.
Follow Ups	Z32 Fuel Pressure - -Grimm- 00:12:36 01/25/11 It will hold ~ 35 psi at idle, and it is boost referenced - ZiNnYc 06:38:11 01/25/11 Re: It will hold ~ 35 psi at idle, and it is boost referenced - -Grimm- 16:05:09 01/25/11 I wouldn't worry about recirculated fuel cooling issues. - ZiNnYc 17:37:42 01/25/11 What do you mean by single FPR? - Ashman2k2 22:14:51 01/25/11 Many guys run A/M FPR's, even parallel feed - CoHPhasor 22:25:25 01/25/11 Thats the reg I was looking at - -Grimm- 13:49:35 01/26/11 Good idea - CoHPhasor 17:29:10 01/26/11
Post a Followup	You cannot reply to this message because you are not logged in.