Subject	Re: It will hold ~ 35 psi at idle, and it is boost referenced
Posted by	-Grimm- on January 25, 2011 at 4:05 PM
	This message has been viewed 126 times.
In Reply To	It will hold ~ 35 psi at idle, and it is boost referenced posted by ZiNnYc on January 25, 2011 at 06:38 AM
Message	Yeah meant damper and regulator. I was planning on running it with the single input from the fuel pump, stock return from the regulator, and two outputs from the regulator to each side of the fuel rails. My only concern with this setup is that the fuel will not be recirculating as much as stock, and might cause heat related issues with the fuel? Ill check it out, thanks.
Follow Ups	Z32 Fuel Pressure - -Grimm- 00:12:36 01/25/11 It will hold ~ 35 psi at idle, and it is boost referenced - ZiNnYc 06:38:11 01/25/11 Re: It will hold ~ 35 psi at idle, and it is boost referenced - -Grimm- 16:05:09 01/25/11 I wouldn't worry about recirculated fuel cooling issues. - ZiNnYc 17:37:42 01/25/11 What do you mean by single FPR? - Ashman2k2 22:14:51 01/25/11 Many guys run A/M FPR's, even parallel feed - CoHPhasor 22:25:25 01/25/11 Thats the reg I was looking at - -Grimm- 13:49:35 01/26/11 Good idea - CoHPhasor 17:29:10 01/26/11
Post a Followup	You cannot reply to this message because you are not logged in.