Subject	Your heads will not match a newer style intake
Posted by	DE944 on January 19, 2011 at 12:17 AM
	This message has been viewed 87 times.
In Reply To	Quick Question About Intake Plenum's posted by -Grimm- on January 18, 2011 at 11:33 PM
Message	Check the year of lower plenum that you have. If it's 94 or newer it will not match the ports on the heads. There was also a lower intake gasket thickness change about the same time. You will have to make sure that they are all compatible before proceeding. I found this out when doing the same on my 92. Your best bet is either getting a 92 lower intake and having JWT machine it, or getting an adapter kit from Bernie. If you change the lower intake you will have to change fuel rails as well. The kit from Bernie is probably the best way to go. Contact him and he can tell you all about it. Hope this helps.
Follow Ups	Quick Question About Intake Plenum's - -Grimm- 23:33:51 01/18/11 Yes (n/m) - KongZTT GT28RS MD 23:42:52 01/18/11 Your heads will not match a newer style intake - DE944 00:17:58 01/19/11 Re: Your heads will not match a newer style intake - -Grimm- 11:45:57 01/19/11 Your options are either to get a 300 Degree fuel rail or - Dave N 19:19:50 01/19/11 Re: Your options are either to get a 300 Degree fuel rail or - -Grimm- 22:52:18 01/19/11 If your worried about down time, I have a lower intake - DE944 23:24:09 01/19/11
Post a Followup	You cannot reply to this message because you are not logged in.