Subject	It's not the sensor; it's the connection. (n/m)
Posted by	NytWolf on January 05, 2011 at 11:36 PM
	This message has been viewed 91 times.
In Reply To	coolant temp sensor is ohming out at 1.5 ohms at 70 degrees. posted by scooter4zx on January 05, 2011 at 10:54 PM
Message
Follow Ups	finally got the car back together after upgrading the - scooter4zx 22:07:50 01/05/11 I figured out the hose it went to the little solenoid thing - scooter4zx 22:19:40 01/05/11 Check your water temp sensor. (n/m) - Wright (Ca) 22:32:42 01/05/11 coolant temp sensor is ohming out at 1.5 ohms at 70 degrees. - scooter4zx 22:54:54 01/05/11 It's not the sensor; it's the connection. (n/m) - NytWolf 23:36:35 01/05/11 ^ Try cleaning the connection. - CoHPhasor 23:57:16 01/05/11 Sounds like you're running super-rich. - CoHPhasor 22:53:40 01/05/11 the vac line is definitly on the fpr.As for a pinched oring, - scooter4zx 23:00:22 01/05/11 would a bad 02 sensor cause excessive smoking? (n/m) - scooter4zx 23:01:58 01/05/11 Another thing I just realized.When I ordered the chip from - scooter4zx 23:15:05 01/05/11 If the O2 reported lean when it wasn't, yes. - CoHPhasor 23:55:42 01/05/11 its not the chip. you are running so rich that looking at - tognot 11:29:03 01/08/11 my dumb ass installed the chip backwards.I had to send the - scooter4zx 16:51:04 01/08/11
Post a Followup	You cannot reply to this message because you are not logged in.