I borrowed an autometer boost gauge from a buddy. I hooked it in with a T at the spot pointed out in the A pillar install article [img src="http://www.ttzd.com/tech/boost/boost02.jpg"> I register about 20 on the vacuum side at idle, but I definitely only reach 2 lbs FULLY pushed out. I get to 0 @ about 5k, and hit 2 only momentarily, full throttle. Is it possible that the TPS needs cleaned and the ECU won't let me get high boost? Or, as mentioned, I need to drop the downpipes? I have heard it suggested that I need to check the wastegates and make sure they're functioning. Like I said at first, the only thing I can think I did was; I changed the oil. Maybe the hose that is very close to the oil filter got damaged while I was getting it off? I don't even know what it goes to. (I used the "drive up on a 2x6 method")
|