Subject	The idle should be perfectly smooth on a well running
Posted by	Audioquest on March 30, 2010 at 12:41 PM
	This message has been viewed 95 times.
In Reply To	EGR help.. posted by 2inTurbo on March 30, 2010 at 11:30 AM
Message	engine. Have you run ECU diagnostics yet? I would also suggest pulling the injector connectors to see if they are corroded, as well as test them with a multimeter to see if they are in spec. If they are corroded, pull all the others with the spring clip as they tend to become that way and will keep things from operating properly. This is a good place to start to ensure good connections are present.
Follow Ups	EGR help.. - 2inTurbo 11:30:13 03/30/10 The idle should be perfectly smooth on a well running - Audioquest 12:41:05 03/30/10 Re: The idle should be perfectly smooth on a well running - 2inTurbo 21:56:41 03/30/10 Stick a good vacuum gage on the engine after the throttle >> - ZUL8TR 13:49:46 03/30/10 Re: Stick a good vacuum gage on the engine after the throttle >> - 2inTurbo 22:00:29 03/30/10
Post a Followup	You cannot reply to this message because you are not logged in.