Subject	PCV restrictors??
Posted by	Paulym1111 on March 27, 2010 at 7:48 PM
	This message has been viewed 797 times.
In Reply To	blazt help posted by Paulym1111 on March 27, 2010 at 11:26 AM
Message	I was taking stuff apart today for inpection..I noticed I dont have a restrictor in my pass. side PCV hose. These are all new, could this cause my smoking issue?? There was some oil in the hardline that the hose hooks to.
Follow Ups	blazt help - Paulym1111 11:26:01 03/27/10 Perhaps adjust TPS to ~ .42V Plugs confirm lean mixture. - jschrauwen 13:12:05 03/27/10 His ECU is showing closed TPS switch activated, its working. (n/m) - SkiFly01 13:03:25 03/31/10 switch to the 6b 11b s, do a boost leak ,check base timing - The Devils Z 13:37:51 03/27/10 also make sure you have good o2 sensors ..they should - The Devils Z 13:39:29 03/27/10 you can replace the battery gauge, and put in ... - pearlzed 16:46:30 03/27/10 PCV restrictors?? - Paulym1111 19:48:34 03/27/10 Am I crazy or is the bottom middle plug have a bent - 5280Z_nightstalker 14:47:50 03/28/10
Post a Followup	You cannot reply to this message because you are not logged in.