Subject	Fairly easy -- just follow the pipes in rear of engine that
Posted by	jzack on March 16, 2010 at 1:20 AM
	This message has been viewed 176 times.
In Reply To	water bypass question posted by randy (detroit) on March 15, 2010 at 10:38 PM
Message	supply coolant to the heater hoses. Those pipes have smaller fittings for the plenum coolant lines. Either cap them off or route a hose between them. Unfortunately one of them is really low and hard to get too (with the upper plenum inplace) ...it goes to a short (4 inch?) nearly vertical hose that then connects to a metal pipe that routes coolant over to the driver side of the plenum...
Follow Ups	water bypass question - randy (detroit) 22:38:00 03/15/10 Re: water bypass question - randy (detroit) 22:39:25 03/15/10 Fairly easy -- just follow the pipes in rear of engine that - jzack 01:20:28 03/16/10 Re: Fairly easy -- just follow the pipes in rear of engine t - randy (detroit) 14:41:04 03/16/10 www.Twinturbo.info is your friend (n/m) - John (MD) 08:04:26 03/16/10 Re: www.Twinturbo.info is your friend - randy (detroit) 14:42:00 03/16/10 all you have to do is cap off the 2 open circuits - John (MD) 21:31:37 03/16/10 Re: all you have to do is cap off the 2 open circuits - randy (detroit) 22:30:12 03/16/10 Answer. - Zarcasm(Hfd, CT) 18:21:39 03/17/10 Re: Answer. - randy (detroit) 19:53:39 03/17/10
Post a Followup	You cannot reply to this message because you are not logged in.