Subject	Valve seals?
Posted by	Driggers on July 28, 2008 at 9:35 AM
	This message has been viewed 116 times.
Message	Just purchased my first 300zx tt. When it boosts a lot of smoke comes out of the exaust, and also the dip stick blows out. Im guessing it the vavle seals not the turbos cause they still spool fine and have not seized up. And if it were the pcv valve it would not idle at all. I mean the car runs great besides that. just wondering if anybody has had this issue before or has any ideas? thanks, noah oh yeah it only has 90k too
Follow Ups	Valve seals? - Driggers 09:35:59 07/28/08 Nope! If you are blowing the dipstick out, it almost - kkrofft (OH) 12:50:03 07/28/08 Re: Nope! If you are blowing the dipstick out, it almost - Driggers 15:15:33 07/28/08 Piston rings require a complete teardown. No point - kkrofft (OH) 19:14:08 07/28/08 have you checked compression? - aliaZ 12:50:49 07/28/08 Re: have you checked compression? - Driggers 15:19:49 07/28/08 need to run a compression check at a minimum - aliaZ 17:05:50 07/28/08 Re: need to run a compression check at a minimum - Driggers 17:31:58 07/28/08 I wouldn't rule out the turbos just yet - aliaZ 09:49:32 07/29/08 Start cheap - 300ZMang 20:51:33 07/28/08
Post a Followup	You cannot reply to this message because you are not logged in.