Subject	ok, i've the wd-40 trick, adjusted the idle correctly w/
Posted by	inf on July 19, 2008 at 7:19 PM
	This message has been viewed 89 times.
In Reply To	Do these two things: posted by BobbyT on July 18, 2008 at 03:57 AM
Message	a computer as well as cleaned all the connectors i could find w/ electrical cleaner. It's still doing this weird idling. I also tested the resistance on the aac and the injectors, did the hose clamp test on the air regulator, checked voltage on the tps and adjusted timing to 15 degrees. I get code 55, tested the compression. Would drilling a hole in the aiv hose to relieve the water in it cause this problem?
Follow Ups	Anyone have these problems? - inf 01:08:28 07/18/08 Do these two things: - BobbyT 03:57:23 07/18/08 ok, i've the wd-40 trick, adjusted the idle correctly w/ - inf 19:19:05 07/19/08 No, but just remove the AIV while you're at it. - BobbyT 02:25:20 07/20/08 the rpm will rise when i set base idle and plug in the - inf 00:14:28 07/24/08
Post a Followup	You cannot reply to this message because you are not logged in.