Subject	I think the ECU just needs to recalibrate.
Posted by	just4kinks on July 18, 2008 at 4:09 PM
	This message has been viewed 123 times.
In Reply To	NA TPS voltage setting (.45 doesn't work) posted by ttzcadet on July 18, 2008 at 02:20 PM
Message	The ECU thinks the throttle is open at 0.45V because it was previously calibrated to 0.2V. Adjust it to 0.45, check continuity at the switch with a multimeter, and recalibrate (step 6 below). Then check again with Blazt. La-Z-Link
Follow Ups	NA TPS voltage setting (.45 doesn't work) - ttzcadet 14:20:23 07/18/08 Re: NA TPS voltage setting (.45 doesn't work) - txq45 15:11:28 07/18/08 Manual shows 0.4 - 0.5V, unless it changed for some years. - just4kinks 15:58:00 07/18/08 I think the ECU just needs to recalibrate. - just4kinks 16:09:55 07/18/08 Re: I think the ECU just needs to recalibrate. - ttzcadet 17:17:21 07/18/08 You did unplug it with the ignition on and then plug it back - Audioquest 19:22:56 07/18/08
Post a Followup	You cannot reply to this message because you are not logged in.