Subject	Changed a engine out & had an injector issue. Can't get it
Posted by	TyreeZtt (SeKy) on July 14, 2008 at 1:09 PM
	This message has been viewed 113 times.
Message	out of the fuel rail. Injectors # 4 and #6 were dead. I done the dremel trick to get to them but am still having issues getting the injector out of the fuel rail. I have tried vice grips, drilling a screw into it and pulling, soaked with PB blaster, tried using fuel pressure to push them out, nothing. I am starting to get very frustrated and really don't want to pull the fuel rail. -Sig--------- Quotes: "jamming my fingers in and out of the exhaust in a slow smooth motion was not only painful after an hour, but also just felt a little odd......" - CollegeBoy
Follow Ups	Changed a engine out & had an injector issue. Can't get it - TyreeZtt (SeKy) 13:09:57 07/14/08 just keep twisting it back and forth with the vice grips - AntiHero 16:04:25 07/14/08 Re: Changed a engine out & had an injector issue. Can't get it - allablur 16:11:24 07/14/08 or you can use a socket that will fit on the pintle side and - LITTLEZ(KY) 21:53:35 07/14/08 two sockets and a hammer = piece of cake - AntiHero 13:05:05 07/15/08 i actually used a small crowbar (n/m) - fanta-z 02:23:25 07/15/08
Post a Followup	You cannot reply to this message because you are not logged in.