Subject	Not firing on 1,3 and 5.
Posted by	DavezTT on July 12, 2008 at 5:38 PM
	This message has been viewed 161 times.
Message	Need some serious help. Just put my engine back in about 3-4 weeks ago. Car ran great, better than ever. Started it yesterday and it ran rich immediately on the passenger side and no power. Got her back to the garage and here is what I know: Pulled coilpack connectors on 1,3 and 5 - no change in RPM Changed plugs in 1 and 3 - no change (covered in gas) Checked compression in 1 - ok Changed coilpacks in 1 and 3 - no change Pull coil packs off of 1 and 3 when car is running and you can hear what sounds like spark shooting to the plug. New wiring harness was installed when the engine was out. Do you think its the PTU? Would it affect it like this? ECU is showing code 34, but i'm sure that's cause its not firing. Any help is greatly appreciated! Thanks!
Follow Ups	Not firing on 1,3 and 5. - DavezTT 17:38:14 07/12/08 sounds like ptu, ground the coil/plug and check for spark. (n/m) - ali300zx 18:55:15 07/12/08 Re: sounds like ptu, ground the coil/plug and check for spar - RedTTZ91(OK) 19:19:02 07/12/08
Post a Followup	You cannot reply to this message because you are not logged in.