Subject	I need brake help, because stopping is good.
Posted by	puddlejumpinzx on July 08, 2008 at 9:11 PM
	This message has been viewed 110 times.
Message	Ok, so here is the deal; I'm trying to bleed the brakes on the Z and I can only bleed the rears for some reason. I put stainless lines all the way around but yet I still can't get anything out of the fronts. Also, none of the calipers are seized up and I'm getting fluid coming out of the rear bleed port on the ABS module. The weird thing is that there is nothing coming out of the front bleed port on the ABS module and there is nothing coming out of the front calipers, even when I use my vacuum pump. When I do try to bleed anything from the front, it acts like it wants to suck air back into the system even when there is no pressure on the brake pedal. Any ideas?
Follow Ups	I need brake help, because stopping is good. - puddlejumpinzx 21:11:10 07/08/08 did you change front calipers? get a helper to help pump - sawbonez 21:35:40 07/08/08 Didn't do any good - puddlejumpinzx 01:19:48 07/09/08 If you close the bleed nipple and remove the brakeline where - WoodmanZ 12:28:33 07/09/08 Re: If you close the bleed nipple and remove the brakeline where - puddlejumpinzx 15:08:13 07/09/08 Did you check to see - Tony@GZperformance 02:44:40 07/09/08 Yup - puddlejumpinzx 23:41:23 07/09/08 Ok I read over this a few time and I am not sure if I am - Tony@GZperformance 14:49:52 07/10/08
Post a Followup	You cannot reply to this message because you are not logged in.