Subject	Suggestion after install
Posted by	Z-Tech on July 02, 2008 at 8:27 PM
	This message has been viewed 198 times.
In Reply To	Installed injectors for the first time... posted by scottyfender on July 02, 2008 at 04:51 PM
Message	Install a pressure guage inline with your fuel system after the fuel filter. You may want to then pressurize the system once they are all installed and before you put the plenum back on. If done correctly the system should stay pressurized and not leak.
Follow Ups	Installed injectors for the first time... - scottyfender 16:51:36 07/02/08 Yes, sir. BUT -> - Milo (SATX) 17:05:35 07/02/08 Did that and used motor oil. it didn't bind up. went smooth (n/m) - scottyfender 17:15:45 07/02/08 3rd - Lubed everthing up well with petro jelly and pressed - jzack 20:43:08 07/02/08 no. The injector should seat all the way down. You don't - Guapo 18:03:54 07/02/08 Ok 2 different answers from 2 reputable people... - scottyfender 19:16:14 07/02/08 if they went in smooth then you are prob okay. I have - robo (sebring1970) 22:16:25 07/02/08 agreed with robo that you're probably okay if they went in - Guapo 09:20:45 07/03/08 2nded. don't use the cap - AntiHero 09:21:50 07/03/08 Suggestion after install - Z-Tech 20:27:25 07/02/08 I pressured up the rail and it held air. - scottyfender 22:12:02 07/03/08
Post a Followup	You cannot reply to this message because you are not logged in.