Subject	Injector connect splicing
Posted by	redfarsi on July 01, 2008 at 8:49 PM
	This message has been viewed 322 times.
Message	I'm wiring the newer style connectors to my z. I read vorpalz's how to on this. link: [ http://twinturbo.net/net/viewmsg.aspx?forum=technical&msg_id=1034070 ] His connector wires are a bit different then mine. I have a white and a brown. I just want to make sure I know which one is which. Is brown the negative and white the positive? Btw the metal ends are the butt connectors I am using to connect them becuase I don't want to solder this. Jzack mentioned them so I got them. [ http://twinturbo.net/nissan/300zx/forums/technical/view/1034113/Good-tips-about-staggering-the-wire-joints----does.html ]
Follow Ups	Injector connect splicing - redfarsi 20:49:58 07/01/08 Injectors are NOT polarity sensitive -- they don't care - jzack 21:39:21 07/01/08 Awesome, thanks a lot jzack! (n/m) - redfarsi 21:54:57 07/01/08 I would do skinny to skinny - RedTTZ91(OK) 23:05:00 07/01/08 There is no skinny to skinny, or fat to fat. (n/m) - redfarsi 23:20:10 07/01/08 It must depend on the model then, because mine did. (n/m) - Jinjiro 10:30:54 07/02/08 No - the issue is the connectors that he got have same - Bernie (NoVA) 17:18:41 07/02/08 FYI -- This FAQ gives some tips on good ways to seal - jzack 23:17:58 07/01/08 and make sure to cut your wires to different lengths - vorpalZ 10:59:03 07/02/08 Yea that was the first thing i did. - redfarsi 00:36:06 07/03/08 Needle nose vice grips work well for removing fubared - doug8867 11:11:43 07/03/08
Post a Followup	You cannot reply to this message because you are not logged in.