Subject	only slight miss and still need help diagnosing
Posted by	speedy z on June 30, 2008 at 9:01 PM
	This message has been viewed 429 times.
Message	replaced all 6 injectors last year. did a check on the ptu. i did an ohm test on the ptu not sure if it is the way to do it but e1 was 55.6 kohm e2-44.1 e3-82 e4 126 E5-128 and e6-85. are these even useful? i know in the manual to do a continnuity test for the ptu but that also didnt work. it doesnt miss horrible and it doesnt seem to be any one cylinder. hard to find that out with such a small miss. can hear it easy at idle just a little burp. driving constant speeds you can feels a little jerk as if it missed. for cleaning all the conectors what do you guys use? any other ideas?
Follow Ups	only slight miss and still need help diagnosing - speedy z 21:01:25 06/30/08 Pull all connectors and make sure none are corroded. Typical - Audioquest 21:54:04 07/01/08
Post a Followup	You cannot reply to this message because you are not logged in.