Subject	Re: (in addition to) Timing belt fiasco....
Posted by	puddlejumpinzx on June 25, 2008 at 11:20 PM
	This message has been viewed 154 times.
In Reply To	Timing belt fiasco.... posted by puddlejumpinzx on June 25, 2008 at 07:50 PM
Message	Ok, so I found out that its getting weak, consistent spark by spinning the CAS but it will not spark a gap larger than 1/8th of an inch. Whats up with that? Also, the timing marks on the cam gears are more like a 1/4 tooth off which I'm thinking is just because it is a new belt. When first putting the belt on, all the marks on the belt, gears, and the rear timing cover all line up but once its turned over, the marks on the belt never line back up when all the other marks line up. Is this normal for an OEM timing belt? One more thing, does the alternator need to be spinning while its starting?
Follow Ups	Timing belt fiasco.... - puddlejumpinzx 19:50:59 06/25/08 Re: Timing belt fiasco.... - txq45 20:27:16 06/25/08 Yeah, and check for corrosion on cas connector (n/m) - jlag 21:02:10 06/25/08 1/2 a tooth out? Why, all you have to do is line up the gear - Audioquest 22:24:39 06/25/08 it is not possible to be a half a tooth off (n/m) - aliaZ 22:34:36 06/25/08 Re: (in addition to) Timing belt fiasco.... - puddlejumpinzx 23:20:07 06/25/08 Try removing your crank angle sensor and then put it back - doug8867 20:13:13 06/26/08 I don't see how the belt is related to you problem. (n/m) - Bernie (NoVA) 01:39:39 06/26/08 Re: I don't see how the belt is related to you problem. - puddlejumpinzx 11:18:50 06/26/08 Only thing I could guess that would relate the issues - Audioquest 11:22:19 06/26/08 Re: Only thing I could guess that would relate the issues - puddlejumpinzx 13:59:07 06/26/08 Re: Re: One more thing... - puddlejumpinzx 14:01:55 06/26/08 I am not familiar with the resistor you are talking of but - Audioquest 07:57:40 06/27/08 Re: Timing belt fiasco.... - puddlejumpinzx 00:32:09 06/27/08 Electrical contact cleaner and a pic work great for removing - doug8867 07:46:28 06/27/08 Good for you. The #1 cause of poor running. Pull all - Audioquest 08:53:39 06/27/08
Post a Followup	You cannot reply to this message because you are not logged in.