| Message |
for my setup (SBC i-color) : I used the 6mm port from the balance tube (on the DS) which was free after all the "usual deletions". This port is not used for anything else, it comes from the middle of the pipe, and the balance tube is large enough to flow a few cfm for the WGs. Of course, when the TBs are closed, there's no boost but vacuum in the plenum, but the WG don't need to be opened. As for the WG hoses, I'm pretty sure you're right but it's not that hard to make 2 equal length hoses. Yes, I know that my equations (in the link) were not for the same purpose, but you can try your own.
|
 |
