Subject	Buzzing the lines out for continuity would be the next
Posted by	jzack on June 12, 2008 at 11:13 PM
	This message has been viewed 115 times.
In Reply To	I traced it back a couple of inches from the connector posted by Red300zxTT on June 12, 2008 at 08:04 PM
Message	thing to check. There's always the option to wire in the resistor closer to the ECU.
Follow Ups	Did Resistor bypass with knock sensor, worked for a while - Red300zxTT 16:33:16 06/12/08 maybe you have a fault in your harness? (n/m) - aliaZ 16:52:48 06/12/08 Soo i should trace the wire back to the ecu. - Red300zxTT 16:54:35 06/12/08 Or just check the wiring within a few inches of the - jzack 18:47:09 06/12/08 I traced it back a couple of inches from the connector - Red300zxTT 20:04:22 06/12/08 Buzzing the lines out for continuity would be the next - jzack 23:13:30 06/12/08 why not just fix it the correct way? (n/m) - eyagel 19:41:46 06/12/08 I agree! However...how did you connect the resistor - twinturbineZ 20:34:25 06/12/08 On my connector I have three slots. I put the resistor - Red300zxTT 01:05:31 06/13/08 there should only be 2 slots on that connector - cossiemodo2000 02:50:16 06/13/08 3slots... with red, black and white wires ? - Dark Diver 06:19:34 06/13/08 That's correct! (n/m) - twinturbineZ 06:53:51 06/13/08 The resistor goes across the white and gray wires! (n/m) - twinturbineZ 06:54:36 06/13/08 KK kool thanks man! (n/m) - Red300zxTT 10:59:16 06/13/08
Post a Followup	You cannot reply to this message because you are not logged in.