Subject	Re: Picture
Posted by	PhilupondZ on June 11, 2008 at 2:36 PM
	This message has been viewed 171 times.
In Reply To	Picture posted by FuerGrissa on June 11, 2008 at 01:09 PM
Message	When adjusting my cas the bolts were in the same location as yours are. Are you sure you are using the passenger side front coil pack wires for measurement? Just one of those measure twice cut once suggestions.
Follow Ups	CAS Adjustment (can I hit it?) - FuerGrissa 12:36:52 06/11/08 Picture - FuerGrissa 13:09:04 06/11/08 It's hard to tell from the photo. Those black lines - Audioquest 13:26:52 06/11/08 They look black in the picture, but in person they are red - FuerGrissa 13:40:15 06/11/08 Re: Picture - PhilupondZ 14:36:14 06/11/08 The one right to the left of the oil fill cap correct? - FuerGrissa 16:05:56 06/11/08 Same thing happened to me when I removed the 3.... - Marc (NJ) 15:34:57 06/11/08 Re: Same thing happened to me when I removed the 3.... - FuerGrissa 16:02:52 06/11/08 Remove driver side intake pipe and if you have small.... - Marc (NJ) 18:03:20 06/11/08 You didnt even have to remove the radiator hoses? (n/m) - FuerGrissa 19:38:33 06/11/08 Re: You didnt even have to remove the radiator hoses? - Marc (NJ) 20:26:40 06/11/08 FYI: The mounting bracket that the CAS bolts down to can be - jzack 20:23:43 06/11/08 Thanks!, CAS Bracket wass off at dealer 2 weeks ago so - FuerGrissa 21:36:11 06/11/08 You can tap on it to get it to turn. It won't hurt anything. - Woody75 (Denver) 16:03:49 06/11/08 You mean flip it over on the same wire? (n/m) - FuerGrissa 19:40:47 06/11/08 Use the black loop on the PTU harness - 300ZMang 20:22:31 06/11/08 location of PTU harness? use dummy terms please >.> (n/m) - FuerGrissa 21:31:39 06/11/08 Black box w/ 7-8 wires on passenger timing belt cover (n/m) - BobbyT 22:04:51 06/11/08 I got mixed results - FuerGrissa 09:47:29 06/12/08 Yes, flip it over on the same wire. (n/m) - Woody75 (Denver) 10:44:10 06/12/08 the #1 plug wire gives same result both ways, the PTU - FuerGrissa 12:28:55 06/12/08
Post a Followup	You cannot reply to this message because you are not logged in.