Subject	Just be aware you will most likely have to replace some
Posted by	Audioquest on June 09, 2008 at 11:02 AM
	This message has been viewed 140 times.
In Reply To	Plenum pull, PCV valve(s) replacement, and valve cover gaske posted by CaptainZappo on June 08, 2008 at 11:35 PM
Message	other hoses etc as from age they become rock hard. The PCV hoses for sure unless they've been done in the past will have to be cut off. I'd recommend doing the coolant hose bypass so you don't blow a hose in the near future and have to take it all apart again. See if you can find another Z member close to you that can at least drop in for some guidance along the way if you feel unsure of doing it.
Follow Ups	Plenum pull, PCV valve(s) replacement, and valve cover gaske - CaptainZappo 23:35:40 06/08/08 only you can answer that.... (n/m) - twinturbineZ 23:55:05 06/08/08 If the Z is not your DD - ZXRider(SoCal) 02:27:16 06/09/08 You should be able to do it... - dyno 500 HP 300ZXTT 04:13:31 06/09/08 Just be aware you will most likely have to replace some - Audioquest 11:02:56 06/09/08 What color was the smoke? - doug8867 12:45:09 06/09/08 This job isn't real hard but there can be a lot to deal - jzack 18:20:56 06/09/08 thanks for all the suggestions! - CaptainZappo 01:06:57 06/10/08
Post a Followup	You cannot reply to this message because you are not logged in.